Wireless

Wireless engine detection that has the fan running before the truck backs in

AMPS designed and builds a three-part wireless system that tells a fire station’s exhaust fan when any truck’s engine is running. It’s installed in hundreds of stations across the US and Canada.

APPLICATION

Wireless engine-running detection for automatic exhaust fan control

INSTALLED BASE

Hundreds of fire stations across the US and Canada

AMPS SCOPE

Custom design and manufacture of transmitter, receiver and interface board

RADIO

FCC-certified 433 MHz radio, deliberately short range

TRUCK INSTALL

About 15 minutes per truck

RUN-ON TIMER

Adjustable, 30 seconds to 10 minutes

HOW IT TURNED OUT

Proven in hundreds of stations

Safer stations

Firefighters and EMS crews are protected from diesel exhaust whenever an engine runs indoors.

Ready to respond

Crews can keep engines warm and ready for a fast response to fire and EMS calls.

Fan up to speed on arrival

The fan is already at full speed when a truck backs in and the hose is connected.

Proven in the field

Installed in hundreds of stations across the US and Canada, with a strong reliability record.

Fast, low-cost installation

A truck kit installs in about 15 minutes, and the receiver is a simple low-voltage wall mount with no conduit.

Easy to expand

Systems arrive paired from AMPS, and stations can add new trucks on their own.

THE PARTNERSHIP

We build their panels. We also designed the wireless.

Our customer is a global air quality equipment OEM whose fire station systems remove diesel exhaust from apparatus bays. AMPS already builds the autostart exhaust fan panels for these systems.

For this project, AMPS designed and manufactures the wireless products that tell those panels when a fire truck is running.

WHAT THE SYSTEM HAD TO DO

Detect a running engine on every truck, with no wiring to the building


Get a reliable signal even where the fan panel has poor reception


Start the fan early enough to be at full speed when the hose connects


Ignore trucks that are just passing by


Keep the fan running until the fumes clear

INSIDE THE SYSTEM

Three products, designed and built by AMPS

A transmitter on each truck, a receiver on the station wall, and an interface board inside the autostart exhaust fan panel.

Wireless transmitter circuit board with wiring inside a protective enclosure.

01 / ONE PER TRUCK

Transmitter

  • Very small package that installs easily in a fire truck
  • Powered from the truck's 12 VDC ignition circuit
  • Signals about every 7 seconds while the engine runs
  • Ships as a bagged kit with instructions, wiring and connectors
  • Installs in about 15 minutes
Wireless transmitter and receiver circuit boards in protective enclosures.

02 / ON THE STATION WALL

Receiver

  • Separate from the fan panel, so it can mount wherever reception is good
  • Polycarbonate wall-mount box, no conduit needed
  • Runs on 24 VAC, the industry and building automation standard
  • Responds to every paired truck, even dozens
  • Sends a 1-second pulse to the panel for each signal

03 / INSIDE THE FAN PANEL

Interface board

  • Installs in each autostart exhaust fan panel
  • Runs the fan's motor starter or VFD
  • Built-in timer, adjustable from 30 seconds to 10 minutes
  • Timer restarts with every new signal
  • Keeps the fan on until no signals arrive for the preset time

HOW IT WORKS TOGETHER

Every running truck reports in about every 7 seconds

STEP 1

Truck approaches

A running truck’s transmitter signals about every 7 seconds. The fan starts as soon as the truck is close to the building.

STEP 2

Receiver passes it on

Each signal from a paired truck triggers a 1-second pulse to the exhaust fan panel.

STEP 3

Board runs the fan

The interface board turns on the fan and restarts its timer with every new pulse.

STEP 4

Fan stops on its own

Once the last engine shuts off and the timer runs out, the fan stops.

Short range on purpose

The FCC-certified 433 MHz radio has a deliberately short range, so trucks driving by a block away don’t trigger the system.

Paired before shipment

AMPS pairs transmitters and receivers before shipping. Stations can easily add trucks later on their own.

Virtually no truck limit

There’s virtually no limit on the number of transmitters in one system.

AMPS SCOPE

Designed and manufactured in-house

01

Compact transmitter

Designed the small transmitter package that fits in a fire truck.

02

Truck power and wiring kit

Put together the kit with everything needed for a 15-minute install.

03

Receiver and interface board

Designed the wall-mount receiver and the board inside the fan panel.

04

Timing logic and pairing

Built the timing logic that ties it together, and pairs every system before it ships.

Hardware inside

Wireless transmitter, receiver and interface board

Designed and built by AMPS

Autostart exhaust fan panel

Polycarbonate receiver enclosure

Industrial Enclosures

PART OF A COMPLETE SYSTEM

The panels this wireless system connects to

AMPS also designs and builds the UL 508A listed autostart exhaust fan panels these products work with.

Need custom electronics for your equipment?

AMPS designs and builds custom electronics, not just control panels. Tell us what your equipment needs to do.

Contact

6641 Angola Rd, Holland,
OH 43528

Hours

Monday – Friday
8:30AM – 5:00PM