AI is driving the biggest data center build-out the industry has seen. Every new rack of GPUs runs hotter than the last one. All of that heat has to go somewhere, which makes cooling one of the fastest-growing parts of the market. It is also one of the most controls-heavy.
The numbers back it up. Goldman Sachs Research projects that US data centers will use about 8% of the country’s power by 2030. Frost & Sullivan expects data center cooling revenue to more than double in a decade, from about $8.2 billion in 2020 to $18.5 billion in 2030.
Behind that growth are coolant distribution units (CDUs), chillers, pumps, and fans. Each one needs a controller. In a data center, that controller has to do more than run the equipment. It has to report to the facility’s management platform in the language that platform expects.
What Redfish is and why it matters
Redfish is that language. It is an open standard from the Distributed Management Task Force (DMTF), built on a web-based RESTful API. It gives servers, cooling systems, and power equipment one common way to report status and take commands from the data center management platform. Major hardware vendors and cloud providers have adopted it.
Here is the catch. Most PLCs don’t speak Redfish. Putting a standard PLC into a Redfish environment usually means adding a gateway or protocol converter. That is one more box to buy, configure, power, and secure. It is also one more point of failure in a system that can’t go down.
Unitronics built Redfish directly into its UniStream controllers. According to Unitronics, UniStream is the first and only PLC line with native Redfish support. No gateway required.
What makes UniStream a fit for CDU control
Redfish gets the attention, but it is only part of the story. A CDU controller has to handle the process, the network, and the facility’s security rules all at once. Here is what UniStream brings to that job.
- One controller does it all: Control logic, I/O, HMI, diagnostics, communication, and central monitoring run in a single unit. No add-ons, no protocol converters, no custom code living outside the controller.
- Native Redfish and IPv6: Unitronics states its PLCs are compliant with Open Compute Project (OCP) requirements, including the mandatory IPv6 support many data center networks call for.
- The protocols you need, already licensed: BACnet, Modbus, REST API, and OPC UA come ready to use. That covers the BMS, SCADA, pumps, EC fans, and VFDs.
- Redundancy built in: N+1 and master-slave group control run over a CAN network. If one unit drops, another picks up and cooling keeps running.
- Remote access: The built-in web server and VNC let operators monitor and control a CDU from anywhere.
- Security: Unitronics cites ISO 27001 certification, which shows up on most data center security checklists.
- Any cooling approach: One controller can run air cooling, direct-to-chip liquid cooling, or immersion, and adapt to different cooling loop layouts.
Two ready-to-deploy CDU packages
Unitronics bundles everything a CDU needs into two configurations. Both deliver the same control and connectivity. The difference is the form factor: an all-in-one PLC and HMI, or a DIN-mounted PLC with a separate remote HMI.
| Package | Main controller | Form factor | What’s included |
|---|---|---|---|
| DCB-CDU-US7-01 | US7-B10-TA32 | 7″ PLC+HMI All-In-One | CAN module for N+1 and master-slave groups, (2) RS485 modules, 16 GB SD card |
| DCB-CDU-USC-01 | USC-B10-TA32 | DIN-mounted PLC and separate 7″ Remote HMI | CAN module, (2) RS485 modules, 16 GB SD card, USL-070-B5 7″ VNC panel for local or remote HMI access |
The RS485 modules handle serial devices: Modbus RTU pumps, EC fans, and VFDs, BACnet MS/TP HVAC equipment, and SCADA or BMS monitoring. The SD card is not optional. Redfish needs it to store events and the audit trail.
Each package also comes pre-licensed for data center communication:
| License | Part number | What it does |
|---|---|---|
| Redfish Standard | ULC-RF101 | Sends CDU status, alarms, and performance data to data center management systems |
| IPv6 | ULC-IPV6101 | Meets the OCP IPv6 requirement for data centers |
| BACnet IP Server | ULC-BNET101 | Lets a building management system monitor the CDU |
| BACnet Client | ULC-BNET201 | Controls BACnet pumps, valves, and HVAC devices over MS/TP and IP |
Where AMPS fits
AMPS Industrial Controls is a family-owned controls integrator and Unitronics distributor in Holland, Ohio. We supply UniStream hardware and licensing. We also do the engineering around it.
That matters for CDU builders. Your team may know thermal design and mechanical systems inside out. Redfish, BACnet, and data center network requirements are a different skill set. You don’t need to build that expertise in-house to get to market.
Here is what we handle:
- Hardware and licensing: We quote and supply the UniStream CDU packages and the licenses that go with them.
- Control system design: We lay out the control and communication architecture for your cooling loop.
- PLC and HMI programming: We write the application in UniLogic, including the Redfish, BACnet, and Modbus integration.
- Panel fabrication: We build the control panel in our shop.
- Commissioning: We start it up on site and make sure it talks to the management platform.
We also teach UniStream. Alex Foulke, our lead controls engineer, runs a two-day https://ampsic.com/etn/unilogic-fundamentals-training/ at our shop. Our free https://ampsic.com/resources/video-library/ covers the basics for engineers who want to program it themselves.
Building cooling equipment for data centers?
Whether you are designing a new CDU or upgrading an existing line, we can help you pick the right UniStream package and get it running. https://ampsic.com/contact-us to talk through your project.
